HASSbara® Performance Ø8-30P
HASSbara Ø8-30P , for machining of small diameter, it is more reliable than the reamer. This tool's performance is high and useful . For the extension to be used on this tool, HASSbara® Extentions refer to the products section.
According to the boring bars, TC.. and CC.. insert types are available. Chips are removed by coolant in the tool to prevent the processing surface why it doesn't scratch the surface .
If you want to work under Ø8mm hole, you must use our reduction by any micro turning tool bar
| Code No | Code | Ø D1 (min-max) | D | L | L1 | Uç | A | INSERT SCREW | Torks |
|---|---|---|---|---|---|---|---|---|---|
| H121P | BA 8-30P SET | 8-30 | |||||||
| H122P | BA 201 8-30P GÖVDE | 8-30 | |||||||
| H1221K | BA201 K8-14 T | 8-14 | 12 | 25 | 25 | TC..06 | 90° | M2 | T06 |
| H1231K | BA201 K12-18 T | 12-18 | 12 | 25 | 40 | TC..09 | 90° | M2,2 | T07 |
| H1241K | BA201 K16-22 T | 16-22 | 12 | 25 | 40 | TC..09 | 90° | M2,2 | T07 |
| H1251K | BA201 K20-26 T | 20-26 | 12 | 25 | 40 | TC..09 | 90° | M2,2 | T07 |
| H1261K | BA201 K24-30 T | 24-30 | 12 | 25 | 50 | TC..11 | 90° | M2,5 | T08 |
| H1232K | BA201 K12-18C | 12-18 | 12 | 25 | 40 | CC..06 | 95° | M2,5 | T08 |
| H1242K | BA201 K16-22C | 16-22 | 12 | 25 | 40 | CC..06 | 95° | M2,5 | T08 |
| H1252K | BA201 K20-26C | 20-26 | 12 | 25 | 40 | CC..06 | 95° | M2,5 | T08 |
| H1262K | BA201 K24-30C | 24-30 | 12 | 25 | 50 | CC..06 | 95° | M2,5 | T08 |
Ø 8-30 LONG BORING BARS
| Code No | Code | Ø D1 (min-max) | D | L | L1 | Uç | A | INSERT SCREW | Torks |
|---|---|---|---|---|---|---|---|---|---|
| H1222K | K8-14 30 CC06 95 | Ø8-14 | 12 | 25 | 30 | CC..06 | 95° | M2.5 | T08 |
| H1223K | K10-16 40 CC06 95 | Ø10-16 | 12 | 25 | 40 | CC..06 | 95° | M2.5 | T08 |
| H1233K | K12-18 50 CC06 95 | Ø12-18 | 12 | 25 | 50 | CC..06 | 95° | M2.5 | T08 |
| H1243K | K16-22 50 CC06 95 | Ø16-22 | 12 | 25 | 50 | CC..06 | 95° | M2.5 | T08 |
| H1244K | K16-22 60 CC06 95 | Ø16-22 | 12 | 25 | 60 | CC..06 | 95° | M2.5 | T08 |
| H1245K | K16-22 70 CC06 95 | Ø16-22 | 12 | 25 | 70 | CC..06 | 95° | M2.5 | T08 |
| H1253K | K20-26 50 CC06 95 | Ø20-26 | 12 | 25 | 50 | CC..06 | 95° | M2.5 | T08 |
| H1254K | K20-26 60 CC06 95 | Ø20-26 | 12 | 25 | 60 | CC..06 | 95° | M2.5 | T08 |
| H1255K | K20-26 70 CC06 95 | Ø20-26 | 12 | 25 | 70 | CC..06 | 95° | M2.5 | T08 |
| H1263K | K24-30 60 CC06 95 | Ø24-30 | 12 | 25 | 60 | CC..06 | 95° | M2.5 | T08 |
| H1264K | K24-30 70 CC06 95 | Ø24-30 | 12 | 25 | 70 | CC..06 | 95° | M2.5 | T08 |
| H1225K | K10-16 40 TC09 93 | Ø10-16 | 12 | 25 | 40 | TC..09 | 93° | M2.2 | T07 |
| H1256K | K20-26 50 CC06 90 | Ø20-26 | 12 | 25 | 50 | CC..06 | 90° | M2.5 | T08 |
| H1257K | K20-26 60 CC06 90 | Ø20-26 | 12 | 25 | 60 | CC..06 | 90° | M2.5 | T08 |
| H1258K | K20-26 70 CC06 90 | Ø20-26 | 12 | 25 | 70 | CC..06 | 90° | M2.5 | T08 |
| H1259K | K20-26 50 TC09 90 | Ø20-26 | 12 | 25 | 50 | TC..09 | 90° | M2.2 | T07 |
| H1260K | K20-26 60 TC09 90 | Ø20-26 | 12 | 25 | 60 | TC..09 | 90° | M2.2 | T07 |
| H1265K | K20-26 70 TC09 90 | Ø20-26 | 12 | 25 | 70 | TC..09 | 90° | M2.2 | T07 |
| H1266K | K20-26 50 TC09 93 | Ø20-26 | 12 | 25 | 50 | TC..09 | 93° | M2.2 | T07 |
| H1267K | K20-26 60 TC09 93 | Ø20-26 | 12 | 25 | 60 | TC..09 | 90° | M2.2 | T07 |
| H1268K | K20-26 70 TC09 93 | Ø20-26 | 12 | 25 | 70 | TC..09 | 93° | M2.2 | T07 |
Ø12 / 5-6-8-10 REDUCTION
| Code No | Code | Ø | Figure No |
|---|---|---|---|
| H1210R | BA 201 12/5 RED. UZUN | 5 | 2 |
| H1211R | BA 201 12/6 RED. UZUN | 6 | 2 |
| H1212R | BA 201 12/6 RED. | 6 | 1 |
| H1213R | BA 201 12/8 RED. | 8 | 1 |
| H1214R | BA 201 12/10 RED. | 10 | 1 |